CLEANING DRY ICE BLASTING ON LIGHTING BEACONS
Among the many dry ice blasting applications, the cleaning of lit beacons on runways through dry ice blasting is undoubtedly the fastest and most surface-respectful technique available.
Dry ice blasting test on runway lighting beacons
- Industry : Airport runway
- Treatment purpose : rubber on runway lighting
- Equipment used : ATX25-P
Only specialized lighting in excellent condition allows pilots to easily locate the landing strip at night and assists them in their approach for a safe landing.
This is why it is critical that runway lighting beacons are maintained in excellent condition. Thus, the dry ice blasting solution offered by Cryoblaster proves to be an effective and environmentally friendly solution to ensure the cleanliness and optimal performance of lighting beacon installations, guaranteeing the safety of night flights.
The dry ice blasting process on lighting beacons
dry ice projection effectively and very rapidly removes rubber residue from runway lighting beacons (airport).
The process is dry, very fast and allows the beacons to be restored without solvents and without risk of damaging or scratching the optics.
The advantages of Cryoblaster for cleaning airport runway lighting beacons
Dry ice blasting with the Cryoblaster ATX25-P (pneumatic) offers numerous advantages for maintaining lighting beacons on airport runways:
- Efficiency and speed: dry ice projection allows for rapid and effective removal of dirt, rubber residue, insects and other contaminants that accumulate on beacons.
- Surface protection: the process is non-abrasive and does not damage the delicate surfaces of beacons, unlike other methods such as sandblasting.
- Safety: the ATX25-P uses compressed air and dry ice, non-toxic and non-flammable elements, ensuring safe use in a sensitive airport environment.
- Environmentally friendly: dry ice sublimes (transitions from solid to gaseous state) after use, leaving no secondary residue to process.
- Versatility: the Cryoblaster ATX25-P can be used to clean various types of beacons and airport equipment, offering a complete and economical solution.
- Reduced downtime: fast and efficient cleaning minimizes service interruptions to beacons and maintains optimal safety levels on runways.
Other applications in the Aerospace sector
Dry ice blasting of manufacturing processes to remove the following contaminants:
- epoxy, PTFE tape,
- silicones, carbon,
- graphite, phenolic resin,
- etc
The ATX25-P restores runway beacons in the blink of an eye...
Good to know : ground lighting systems for landing strips are known by various names, and some of them can be cleaned by dry ice blasting (in blue).
- Runway Lighting System : This is the set of lights that mark the runway boundaries and guide aircraft during takeoff and landing.
- Approach Lighting System: : This is a lighting system that provides visual information to help pilots align the aircraft with the runway during approach for landing.
- Runway Threshold Lighting: : This is the lighting that indicates the beginning of the usable runway for landing.
- Runway Edge Lighting (Runway Edge Lighting) : This is the lighting that marks the runway edges.
- Runway Centerline Lighting : This is the lighting that marks the runway centerline.
- Touchdown Zone Marking (Touchdown Zone Lighting) : This is the lighting that indicates the touchdown zone on the runway.
- Centerline Beacons
- Taxiway Beacons
These lighting systems are essential for the safety of aircraft operations, particularly in low visibility or nighttime conditions.
Discover our dry ice blasting solutions: equipment, services and training by contacting us at +33 (0) 4 81 61 02 75 or by filling out the form below
