HOME > COMPRESSORS: CHOOSING THE RIGHT ONE > MSP 1300
MSP 1300 Compressor
Performance dedicated to dry ice blasting and abrasive air blasting
Le MSP 1300 compressor is designed to efficiently power a dry ice blasting machine and/or an abrasive air blasting system on mobile job sites. Objective: pressure stability, consistent flow rate et simplified logistics on site.
1 m³/min at 15 bar
workshop & vehicle
Why is this compressor a good fit for dry ice blasting & abrasive air blasting?
- Flow rate sized for light to intermediate interventions.
- Adjustable pressure to adapt to the nozzle and level of buildup.
- Integration solutions: wheels (mobile workshop) or skid (vehicle).
Key Points
- Compatibility : suitable for Cryoblaster® XP02 machines (CB02-E) and NanoGom and Raptor abrasive blasters.
- Adjustable flow rate : 1,3 m³/min at 7 bar or 1 m³/min at 15 bar, depending on use.
- Compact design : wheeled or skid version for vehicle integration.
- Sound regulation : announced sound level 97–99 dB(A) depending on version.
For what use is the MSP 1300 compressor relevant?
If you're looking for a complete mobile et simple system to deploy, the MSP 1300 compressor is suitable for interventions where logistics and consistency are priorities, rather than very high output rates.
- Routine maintenance, difficult access, small to medium-sized surfaces.
- Quick adjustments based on nozzle / operating pressure.
- Mobile workshop or vehicle setup (skid), depending on your organization.
Compact compressed air flow calculator
* Cryoblaster® abrasive blasting nozzles draw approximately 25% ambient air via a Venturi device, which improves efficiency at equivalent compressed air flow.
0
Recommended compressor
Analyze…The calculation can pre-fill your quote request. See bottom of page
Technical specifications
All information on the MSP 1300 compressor.
| Max. compressed air flow | 1,3 m³/min (7 bar), 1 m³/min (15 bar), up to 1,75 m³/min (unregulated zones 7 bar) |
|---|---|
| Air consumption | Adjustable: 7 / 8,5 / 10 / 15 bar |
| Engine | Briggs & Stratton Vanguard 23 HP gasoline |
| Starting | Electric with key |
| Air outlet | 1 × 3/4″ |
| Fuel tank capacity | 8.5 L |
| Compressor circuit oil | 4.5 L |
| Dimensions (Skid / Wheels) | 1106 × 602 × 660 mm / 1200 × 790 × 790 mm |
| Weight (Skid / Wheels) | 214 kg / 219 kg |
| Sound level | 97 to 99 dB(A) LWA depending on version |
Ergonomics & safety
- Maintenance access : hinged cover, access to air valve and final cooler (optional quick connector).
- Versatile setup : wheels (mobility) or skid (fixed station / workshop vehicle integration).
- Safety : automatic shutdown in case of overheating, components protected under robust casing.
Specialized options
- Handling winch : to reduce effort when moving in constrained environments.
- Remote final cooler : to improve air quality and protect sensitive tools.
- Help with selection : if you're unsure, compare with MSP 2000 & 3000.
FAQ – Sizing & use
Is the MSP 1300 sufficient to power a dry ice blasting machine?
For light to intermediate interventions, yes — the key is to align available flow rate, operating pressure et nozzle. For high output rates or power-hungry nozzles, compare with higher ranges (e.g. MSP 2000 & 3000).
How to avoid undersizing the compressor?
Tell us (1) the machine, (2) the target pressure, (3) the type of soiling, (4) the intended nozzle. Then size with a margin to avoid speed drops. Helpful guide: Flow & pressure (guide).
Get clear sizing (no fluff)
You tell us your machine, the target pressure and your use (dry ice blasting / abrasive blasting). We recommend a coherent configuration and, if needed, we guide you toward the most suitable compressor model.
Phone: +33 (0)4 81 61 02 75 • Email: contact@cryoblaster.fr
To compare if your needs change
If you anticipate higher output rates, multiple nozzles, or more intensive job sites, compare with higher ranges:
Pair your compressor with the ideal machine!
Need integration advice or a specific configuration? Our team supports you to succeed with every intervention using the MSP 1300 and your Cryoblaster® dry ice blasting machines and professional abrasive blasters.
Contact us at +33 (0)4 82 61 02 75
Quote/advice request
COMPRESSORS
