DRY ICE BLASTING ON runway lights
Among the many applications of dry ice blasting, cleaning runway lights using the dry ice blasting process is certainly the fastest and most surface-friendly technique.
Dry ice blasting test on runway lights
- Sector : Aeronautics - Airport Runway
- Purpose of treatment : rubber on track lighting
- Material used :
ATX25-P
Only specialized lighting in very good condition can allow pilots to easily find the runway at night and help it in its approach to a safe landing.
This is why it is essential that runway lighting is maintained in an excellent state of cleanliness. Thus, the dry ice blasting offered by Cryoblaster proves to be an effective and ecological solution to ensure the cleanliness and optimal performance of airfield lighting installations, thereby guaranteeing the safety of night flights.
The dry ice blasting process on airfield lighting
the dry ice blasting process effectively and very quickly removes rubber residues from runway lights (airport).
The process is dry,very fast and allows to restore the marking without solvents and without risk of damaging or scratching the optics.
Advantages of Cryoblaster for Cleaning Airport Lights
Dry ice blasting with the Cryoblaster ATX25-P (pneumatic) offers numerous advantages for maintaining airfield lighting on airport runways:
- Efficiency and speed: the dry ice blasting process quickly and effectively removes dirt, rubber residues, insects, and other contaminants that accumulate on the beacons.
- Surface protection: the process is non-abrasive and does not damage the fragile surfaces of the beacons, unlike other methods such as sandblasting.
- Safety: the ATX25-P uses compressed air and dry ice, which are non-toxic and non-flammable elements, ensuring safe use in a sensitive airport environment.
- Eco-friendly: dry ice sublimates (changes from solid to gas) after use, leaving no secondary residue to treat.
- Versatility: the Cryoblaster ATX25-P can be used to clean various types of beacons and airport equipment, thus offering a complete and economical solution.
- Reduced downtime: fast and efficient cleaning minimizes service interruptions for beacons and maintains an optimal level of safety on runways.
Other applications in the Aeronautics sector
Dry ice cleaning of manufacturing processes to remove the following pollution:
- epoxy,Teflon tape,
- silicones, carbon,
- graphite, phenolic resin,
- etc
The ATX25-P restores runway markers in the blink of an eye...
Good to know : Ground lighting systems for airstrips are known by different names, and some of them can be cryogenically cleaned (in blue).
- Runway Lighting System : This is the set of lights that delimit the runway and guide aircraft during take-off and landing.
- Approach Lighting System: This is a lighting system that provides visual information to help pilots align the aircraft with the runway when approaching for landing.
- Runway Threshold Lighting System: This is the lighting that indicates the beginning of the runway that can be used for landing.
- Runway Edge Lighting: This is the lighting that delineates the edges of the runway.
Runway Centerline Lighting
: This is the lighting that marks the center of the track.- Touchdown Zone Lighting: This is the lighting that indicates the touchdown zone on the runway.
- Axial lighting
- Taxiway markings
These lighting systems are essential for the safety of flight operations, especially in low visibility or night conditions.
Discover our dry ice blasting solutions: equipment, services, and training by contacting us at +33 (0) 4 81 61 02 75 or by filling out the form below
Contact form
Other videos on: Aeronautics /Aerospace
- Dry ice blasting runway lights | ATX25-P
- Dry ice blasting of a mold for composite materials | ATX25-E