HOME > DRY ICE BLASTING MACHINES > XP RANGE > XP07
XP07 - Vue latérale 1
XP07 - Vue latérale 2
DOUBLE GRINDER SINGLE-TUBE DRY ICE BLASTING MACHINE
XP07 dry ice blaster: Double Grinder innovation
The XP07 marks a new technological milestone in precision dry ice blasting. Built on the proven ergonomics of the ATX nano-E, it integrates an unprecedented grinding technology to deliver total versatility on the most delicate surfaces.
- Plage de pression avec régulation : 0 à 16 bar (adaptation surfaces sensibles)
- Dry ice consumption: 8 to 26 kg/h
- Hopper: 7 kg 304 stainless steel + high-frequency electric vibrator
- Control panel: tilted + 0–16 bar glycerin-filled pressure gauge
- Standard pack: 5 m antistatic hose, Double LED blast gun, 1 M nozzle & 1 BPL15 flat nozzle
To secure your setup: Compressed air & dry ice blasting · Compressed air sizing · Cleaning electrical cabinets
XP07 FAQ →
Specifically developed for high precision, the XP07 dry ice blaster is designed for applications requiring total control of particle size. Thanks to its exclusive adjustable double-grinding system, it excels both in deburring technical plastic parts and in safe cleaning of electrical cabinets (energized and de-energized), electronic boards, or delicate surfaces such as fabrics.
To go further and secure your setup:
-
- Compressed air & dry ice blasting — understand the critical points related to air quality and stability.
- Compressed air sizing — avoid performance losses and unsuitable settings.
- Cleaning electrical cabinets — a sensitive application requiring precise pressure control.
SUPPORT
Why validate your setup?
Consistent settings (air, pressure, nozzle) protect sensitive surfaces and ensure stable performance.
✔️ Pressure truly suited to the surfaces
✔️ Compressed air compatible with your application
✔️ Consistent choice of nozzles and options
✔️ Reduced risk of damage
Fast response regarding the standard version, LED options, or the GT version.
Mastering the Double Grinder and High-Precision control
The XP07 interface is designed for full responsiveness in the field. Particle-size control is adjusted directly via the front dial for instant adaptation to the surface.
✔️ Front manual adjustment: intuitive dial to vary from 0.2 to 3.0 mm
✔️ Standard dual LED lighting: blast gun equipped for perfect visibility
✔️ 0 to 10 bar glycerin-filled pressure gauge (stable, anti-vibration reading)
Need to validate the grinding fineness for your parts? Request technical advice
Positioning of the XP07 dry ice blaster for operations on sensitive surfaces: when should you choose this equipment?
The XP07 is the ultimate tool for high-precision work on ultra-sensitive surfaces. The XP07 dry ice blaster is not just a cleaning machine; it is a surgical-precision tool. Thanks to its Double Grinder system, it makes it possible to treat surfaces where conventional dry ice blasting is considered too aggressive. It transforms 3 mm dry ice into a stream of microparticles (0.2 to 3 mm) precisely calibrated for your application.
Typical applications for the XP07 dry ice blaster
The XP07 is the ultimate tool for treating ultra-sensitive surfaces. Its key innovation lies in its Double Grinder system: a front manual dial that grinds 3 mm dry ice pellets into calibrated microparticles of 0.2 to 3 mm. It therefore offers total versatility, from intensive deburring to the most delicate electronics cleaning.
Electrical Cabinets & Electronics
Safe cleaning of PCBs and cabinets. Micro-shredding removes dust without mechanical damage.
- Live cleaning possible
- Dual-LED gun for dark areas
Plastics & Deflashing
Clean removal of flash from technical plastic parts and cleaning of complex mold cavities.
- Surgical finish (0.2 mm particles)
- Zero abrasion of critical surfaces
Aluminum Foundry & Fabrics
Exceptional versatility: from degreasing aluminum foundry parts to gentle cleaning of textiles (car seats, upholstery...).
- Instant adjustment of particle size
- Dry cleaning without secondary residue
Precision Maintenance
Cleaning of frames, narrow mechanisms and hard-to-reach areas thanks to the high-pressure mono-tube system.
- Controlled ice consumption
- 2 standard nozzles (round and flat)
Technical data (XP07 Double Grinder)
Inclusive
Double LED Gun & Hose
- Double LED gun
- Full visibility in cabinets
- 5-meter antistatic hose
2-Nozzle Pack
- Round nozzle (Precision)
- Flat nozzle (Coverage)
Double Grinder
- Front manual dial
- 0.2 to 3 mm particles
Options (depending on applications)
Plastics & Automotive
Optimized access for complex areas in the plastics and automotive industries.
Delrin® Nozzles
Ideal for sensitive surfaces and live cleaning on energized equipment.
Vortex Accelerator
Increases efficiency by 30 to 50% thanks to an optimized helical flow.
Limitations and unsuitable use cases
Optimal use
- Deburring and fragile surfaces
- Targeted preventive maintenance
- High value-added components
- Electrical cabinet cleaning
- Automotive cleaning (requires GT insert for chassis)
- Plastics processing & foundry molds
Unsuitable use cases
- Heavy contamination (heavy mill scale)
- Very large surfaces (see the ATX range)
- Deep rust
- Thick limescale
- Paint stripping
Frequently asked questions (XP07)
Learn how to adjust particle size for deburring, or how to work safely on an energized electrical cabinet.
How do you adjust particle size for a precise deburring operation?
Adjusting the particle size on the XP07 is essential when moving from surface cleaning to technical deburring without damaging the substrate.
Principle: The XP07 uses an integrated grinding system, known as a double grinder. For deburring applications, it is recommended to refine the dry ice into micro-particles.
Action: Adjust the dry ice flow regulator and the grinding selector on the front panel of your blaster. A fine particle size makes it possible to reach complex areas and remove plastic or machining burrs with high precision.
Why it matters: Smaller dry ice particles deliver a more controlled impact on the surface. This reduces the risk of marking or damaging delicate parts while maintaining enough energy to detach fine burrs.
Result: The XP07 provides clean, accurate deburring on complex polymer or aluminium parts, with minimal surface stress and no secondary waste.
Can the XP07 be used on a live electrical cabinet?
Yes, under controlled operating conditions. This is one of the key strengths of the XP07 technology. Dry ice blasting is a dry and electrically non-conductive process, making it particularly suitable for sensitive electrical environments.
Electrical safety: Dry ice sublimates instantly into gas on contact with the surface. It leaves no residual moisture, which significantly reduces the risk of short circuits or electrical arcing when the operation is carried out correctly.
Operating protocol: Use the optional BXS Delrin nozzle measuring 30 cm. Before starting, make sure there is no condensation on the nozzle. Maintain the required minimum safety distance in accordance with applicable standards and internal safety procedures, including NF C 18-510 where relevant. Work with controlled sweeping movements to remove dust and carbon residues from contactors, circuit breakers and other electrical components.
Why it matters: Conventional cleaning methods often require full electrical shutdown, disassembly or drying time. With the XP07, the cleaning process remains dry, precise and non-abrasive, reducing the constraints usually associated with electrical maintenance.
Result: The XP07 makes it possible to clean electrical cabinets more efficiently while limiting production downtime, provided that the intervention is carried out by qualified personnel using the appropriate safety protocol.
Why is the XP07 preferred for sensitive industrial maintenance?
The XP07 combines compact design, precision and power, making it particularly suitable for industrial environments where access is limited and cleaning quality must be highly controlled.
Controlled impact: Unlike sandblasting, dry ice blasting does not generate secondary waste. The dry ice sublimates on contact with the surface, leaving only the removed contamination to be collected.
Versatility: The XP07 can be used for delicate mould cleaning as well as for removing heavy grease from production equipment, simply by adjusting the pressure settings or changing the nozzle.
Why it matters: Sensitive industrial maintenance often requires cleaning without damaging components, without adding moisture and without spreading abrasive media inside the equipment. The XP07 offers a dry, precise and non-abrasive cleaning method that limits the risk of surface alteration.
Result: The XP07 allows maintenance teams to clean complex industrial equipment efficiently, even in confined areas, while reducing downtime, secondary waste and the risk of damage to sensitive surfaces
Compressed air: use your existing system or opt for a standalone solution
Most industrial facilities already have the compressed air required to operate the XP07. If you are looking to start a new business or work with full autonomy, we also offer compressors specifically designed for mobile and heavy-duty use.
Service Provider Pack
Ideal solution for a quick start with a consistent and mobile configuration.
MSP 1300 Compressor
Cryoblaster® machines at a glance
Quickly compare the main models according to your actual needs: precision, performance, industrial versatility, or cleaning of larger surfaces.
XP02
Compact machine for sensitive surfaces, automotive applications, de-energized electrical cabinets and light maintenance work.
View machine
XP07
Compact machine with a double grinder, suitable for technical applications in plastics, foundry, electrical systems, automotive and electronics.
View machine
ATX nano
Versatile industrial machine for small and medium-sized surfaces, sensitive equipment and routine maintenance operations.
View machine
ATX nano DS
Machine with a digital screen for saving pressure and dry ice consumption settings, useful for repetitive or automation-ready applications.
View machine
ATX25-E
Industrial electropneumatic machine designed for intensive cleaning work, large surfaces and corrective maintenance operations.
View machine
ATX25-P
100% pneumatic machine designed for environments requiring a solution without electrical power supply, especially ATEX Zone 2 gas and Zone 22 dust areas.
View machineUnsure which Cryoblaster® model is right for you? Check out our comprehensive guide to find the best solution for your specific application.
View the full dry ice blasting machine comparisonNeed a quote for services, equipment brochures, prices...?
Cryoblaster® advisors are at your disposal.
Whatever your cleanliness needs, we are here to help you find the most suitable solution for your needs and budget.
Fill out the form below. One of our advisors will get back to you as soon as possible, or contact us at:
